Sphere Membrane Dual Membrane Biogas Storage Tanks

Sphere Membrane Dual Membrane Biogas Storage Tanks Brief introduction of sphere membrane dual membrane biogas storage tanks Biogas storage tanks are used for biogas storage. It's mounted tightly on the roof of the reactor. The gas holder system has a double membrane structure. The external...

Send InquiryChat Now

Product Details

Sphere Membrane Dual Membrane Biogas Storage Tanks

Brief introduction of sphere membrane dual membrane biogas storage tanks
Biogas storage tanks are used for biogas storage. It's mounted tightly on the roof of the reactor. The gas holder system has a double membrane structure.
The external cover dome is made of PVC and produced with special additives that are ultraviolet and precipitation resistant. Internal membrane, which is in direct contact with biogas, is made of a special material PVDF. The internal membrane is stretched by the pressure of the produced biogas. Air is pumped between the cover dome and internal membrane so that it provides pressure to the upper side of the membrane and gives a spherical shape to the cover dome.
Biogas pressure inside the gas holder on average is from 200 to 1000 Pa. The gas holder provides enough for 2-3 hours storage of biogas.
Membranes are designed and cut using machines with numerical program control. Welding is performed using high-frequency current welding. This gives considerable advantages in quality if to be compared with membranes that are handmade and glued or welded by heating elements. The hermetic sealing in gas holder mounting systems are secured by pilot-operated check valves. For gas holder safe operation an excessive pressure valve is installed. Acrylic inspection holes and branch pipes are included into the scope of the gas holder supply.

Features and benefits of sphere membrane dual membrane biogas storage tanks

Features

Benefits

Self Support Membrane Fabric, with No Additional Supports or Anchorage

Lower Total Cost of Ownership, Ease of Installation

PVC Coated and Ultraviolet (UV) Ray Protection

Reduced Maintenance, Long Service Life

Storage Volumes Exceeding 200,000ft3

Design Flexibility

Redundant High Efficiency Air Blowers

Maximum Operational Uptime, Lower Operating Costs

Access Manhole for Visual Inspection

Ease of Periodic Inspection and Maintenance

Simple Anchorage Devices

Ease of Installation

Main Criteria for the Selection of sphere membrane dual membrane biogas storage tanks
-  Volume
-  Pressure
-  External loads
-  Tank diameter
-  Agitator technology
-  Costs

Sphere membrane dual membrane biogas storage tanks type
Shape : Sphere
The membrane structure is put on the top of the tank that biogas storage and output are in the whole structure. The whole structure likes the ball.
 Advantages:

  • Costs less than Mounted on Surface of land.

  • This system can be both regarded as top tap of the tank and the storage system. This saves space and money.

  • This is suitable for those projects of daily biogas-output at the middle or below.

  • Save space.

Service and warranty of sphere membrane dual membrane biogas storage tanks
Sales service time: 24 hours for one day, 6 days for one week to supply completely service for you any time.
Warranty:

  • 12 months for complete set of equipment,

  • to repair the outer-membrane and inner-membrane for free within 10 years.

  • free replacement for outer membrane and inner membrane within 3 years since customer receives equipment.

Inquiry